Posted on Leave a comment





Item No SIGKV003

Buy Now

A light weight polyester based .

That can be applied Dry.

Grain runs parallel to the finished edge.

Shrinks tight with iron or heat gun.

Attached where you want.

Takes Dope, Enamel, or Opoxy

Very high impact strength

Easy to apply.

Koverall is a cloth covering of the type used on full-scale aircraft, but lighter weight, (1 1/4oz.per.sq.yd.), for models.

Koverall can be used on almost all R/C Models large and small. Its superior strength and low price has made Koverall a real favorite with builders of giant size models.

It’s the most economical cloth covering you can buy.

Direction For Use. Koverall.

Sand the framework carefully, removing any excess glue or rough spots, No Covering will conceal poor workmanship.

Brush a coat of clear Supercoat, Lite Coat Dope, or Nitrate Dope on the entire framework.

Dope. Model aircraft.

27% Acetone w/v 38% Xylene w/v.  A high quality, fast drying, tightening dope foe use on tissue or silk.

When dry, sand with fine sandpaper and brush on a second coat. When dry, again sand lightly to remove any raised grain or wood fuzz.

SIG Koverall is an uncoated, heat shrinkable, plain fabric. It has no glue on it. To adhere Koverall to a model, you can either dope it on, (the traditional silk-and-dope method), or better yet, use SIG Stix-it heat-activated covering adhesive. Just brush a coat of Stix-it on the model framework, let dry, then iron-on the koverall just like you would a much more expensive iron-on fabric covering.


Stix-It is the perfect companion for most covering materials. It has a heat sensitive adhesive built right in. Although especially designed for Sig Koverall, Stix-it works beautifully with any of the plastic flim and other iron on fabric covering materials.

Once the Koverall is stuck down around the edges, it can be shrunk perfectly tight with a iron or heat gun. Seal the Koverall with 1-2 coats of SIG Nitrate Clear Dope and then apply the finish of your choice.

Visit our online store.

Get in contact with us leave a comment.

E-Mail.  vik@vikshobbies,com

Viks Hobbies & Models

Leave a Reply

Your email address will not be published.